#include <StringConstants.au3> ; to declare the Constants of StringRegExp
#include <Array.au3> ; UDF needed for _ArrayDisplay and _ArrayConcatenate
Local $sRegex = "(?m)(?ms)(?<date>[0-9]{1,2}\/[0-9]{1,2}\/[0-9]{4})\s(?<time>[0-9]{2}:[0-9]{2}:[0-9]{2})\s-\sProcess\((?<process>.*?)\)\sUser\((?<user>.*?)\)\sProgram\((?<program>.*?)\)\n\s*Host\((?<host>.*?)\)\sInstallation\((?<installation>.*?)\)\s*VRMF\((?<vrmf>.*?)\)\sQMgr\((?<qmgr>.*?)\)\s*(?<errorCode>AMQ[0-9]{4}):\s(?<errorDesc>.*?)EXPLANATION:\s*(?<explanation>.*?)ACTION:\s*(?<action>.*?)\s-{1,10}\s(?<source>.*?)\s\:\s(?<linenumber>[0-9]{0,4})\s-{50,60}"
Local $sString = "10/26/2021 12:39:50 - Process(8272.240) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.240) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(22164) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.241) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.241) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(23212) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.242) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.242) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(25820) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.243) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.243) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(6588) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.244) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.244) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(12328) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.245) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.245) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(23808) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.246) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.246) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(21220) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.247) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:50 - Process(8272.247) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(21620) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:51 - Process(8272.248) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9616: The CipherSpec proposed is not enabled on the server." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The SSL or TLS subsystem at the server end of a channel been configured in such" & @CRLF & _
"a way that it has rejected the CipherSpec proposed by an SSL or TLS client." & @CRLF & _
"This rejection occurred during the secure socket handshake (i.e. it happened" & @CRLF & _
"before the proposed CipherSpec was compared with the CipherSpec in the server" & @CRLF & _
"channel definition). " & @CRLF & _
"" & @CRLF & _
"This error most commonly occurs when the choice of acceptable CipherSpecs has" & @CRLF & _
"been limited in one of the following ways: " & @CRLF & _
"(a) The server queue manager SSLFipsRequired attribute is set to YES and the" & @CRLF & _
" channel is using a CipherSpec which is not FIPS-certified on the server. " & @CRLF & _
"(b) The server queue manager EncryptionPolicySuiteB attribute has been set to a" & @CRLF & _
" value other than NONE and the channel is using a CipherSpec which does not" & @CRLF & _
" meet the server's configured Suite B security level. " & @CRLF & _
"(c) The protocol used by the channel has been deprecated. Note that IBM may" & @CRLF & _
" need to deprecate a protocol via product maintenance in response to a" & @CRLF & _
" security vulnerability, for example SSLv3 has been deprecated. Continued use" & @CRLF & _
" of SSLv3 protocol is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_V3_ENABLE=TRUE. " & @CRLF & _
"(d) The requested CipherSpec has been deprecated. Note that IBM may need to" & @CRLF & _
" deprecate a CipherSpec via product maintenance in response to a security" & @CRLF & _
" vulnerability, for example RC4_MD5_US has been deprecated. Continued use of" & @CRLF & _
" deprecated CipherSpecs is not recommended but may be enabled by setting" & @CRLF & _
" environment variable AMQ_SSL_WEAK_CIPHER_ENABLE=<CipherSpec>. For example," & @CRLF & _
" AMQ_SSL_WEAK_CIPHER_ENABLE=RC4_MD5_US " & @CRLF & _
"" & @CRLF & _
"The channel is '????'; in some cases its name cannot be determined and so is" & @CRLF & _
"shown as '????'. The channel did not start. " & @CRLF & _
"" & @CRLF & _
"The remote host name is 'vmpqg17seapd (10.12.112.81)'." & @CRLF & _
"ACTION:" & @CRLF & _
"Analyse why the proposed CipherSpec was not enabled on the server. Alter the" & @CRLF & _
"client CipherSpec, or reconfigure the server to accept the original client" & @CRLF & _
"CipherSpec. Restart the channel. " & @CRLF & _
"" & @CRLF & _
"This message might occur after applying IBM MQ maintenance because the FIPS and" & @CRLF & _
"Suite B standards are updated periodically. When such changes occur, IBM MQ is" & @CRLF & _
"also updated to implement the latest standard. As a result, you might see" & @CRLF & _
"changes in behavior after applying maintenance. For more information about the" & @CRLF & _
"versions of FIPS and Suite B standards enforced by IBM MQ, refer to the readme:" & @CRLF & _
"" & @CRLF & _
"" & @CRLF & _
" http://www-01.ibm.com/support/docview.wss?rs=171&uid=swg27006097 " & @CRLF & _
"----- amqccisa.c : 7899 -------------------------------------------------------" & @CRLF & _
"10/26/2021 12:39:51 - Process(8272.248) User(IBMWebSphMQ05) Program(runmqlsr.exe)" & @CRLF & _
" Host(IBMMQ02APWPDCL) Installation(Installation1)" & @CRLF & _
" VRMF(9.0.0.3) QMgr(DTCC)" & @CRLF & _
" " & @CRLF & _
"AMQ9999: Channel '????' to host 'vmpqg17seapd (10.12.112.81)' ended abnormally." & @CRLF & _
"" & @CRLF & _
"EXPLANATION:" & @CRLF & _
"The channel program running under process ID 8272(5464) for channel '????'" & @CRLF & _
"ended abnormally. The host name is 'vmpqg17seapd (10.12.112.81)'; in some cases" & @CRLF & _
"the host name cannot be determined and so is shown as '????'." & @CRLF & _
"ACTION:" & @CRLF & _
"Look at previous error messages for the channel program in the error logs to" & @CRLF & _
"determine the cause of the failure. Note that this message can be excluded" & @CRLF & _
"completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"" & @CRLF & _
"attributes under the "QMErrorLog" stanza in qm.ini. Further information can be" & @CRLF & _
"found in the System Administration Guide. " & @CRLF & _
"----- amqrmrsa.c : 938 --------------------------------------------------------"
Local $aArray = StringRegExp($sString, $sRegex, $STR_REGEXPARRAYGLOBALFULLMATCH)
Local $aFullArray[0]
For $i = 0 To UBound($aArray) -1
_ArrayConcatenate($aFullArray, $aArray[$i])
Next
$aArray = $aFullArray
; Present the entire match result
_ArrayDisplay($aArray, "Result")
Please keep in mind that these code samples are automatically generated and are not guaranteed to work. If you find any syntax errors, feel free to submit a bug report. For a full regex reference for AutoIt, please visit: https://www.autoitscript.com/autoit3/docs/functions/StringRegExp.htm